43
Chapter 4: Using the Wireless Network Monitor
Creating a New Profile
Wireless-G PCI Adapter
5. The next screen displays all of the Adapter’s settings. If these are correct, you can save these settings to your
hard drive by clicking Save. Click Next to continue. If these settings are not correct, click Back to change
your settings.
6. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to
Network to connect to your network. Clicking Return to Profile will open the Wireless Network Monitor’s
Profiles screen.
Congratulations! Setup is complete.
Figure 4-40: Confirm New Settings
Figure 4-41: The Congratulations Screen
To Next Page
Loading...
