11
Chapter 5: Hardware Installation
Connecting the Adapter
Wireless-B USB Notebook Adapter
Chapter 5: Hardware Installation
Connecting the Adapter
1. The Adapter comes with the USB cable you will use to connect the Adapter to your PC.
Connect one end of the USB cable to the USB port of the Adapter.
Connect the other end of the USB cable to one of the USB ports on your computer.
Figure 5-2: The Adapter’s USB Port
Figure 5-1: How the Adapter Connects to Your PC
Figure 5-3: A PC’s USB port
NOTE FOR WINDOWS XP USERS: You must install the Adapter’s hardware
before installing the software.
NOTE FOR WINDOWS 98SE, ME, AND 2000 USERS: You must run the
Setup Wizard to install the software before installing the hardware.
To Next Page
Loading...
