Linksys WUSB11 - Figure 6-5: Windows XP Zero Configuration Connection with WEP; Figure 6-6: Windows XP Zero Configuration - Active Wireless Connection

17
Chapter 6: Driver Installation and Configuration for Windows XP
Windows XP Wireless Zero Configuration
Wireless-B USB Network Adapter
3. If WEP is enabled, enter the WEP key of your wireless network in the Network key field, and re-enter it in the
Confirm network key field. Then, click the Connect button, and go to step 4.
4. The Zero Configuration icon will show a wireless connection when your connection is active.
For more information about wireless networking on a Windows XP computer, click Start and then Help and
Support. Enter the keyword wireless in the field provided, and press the Enter key.
Congratulations! The installation of the Wireless-B USB Network Adapter is complete.
Figure 6-5: Windows XP Zero Configuration Connection
with WEP
NOTE: Windows XP Wireless Zero Configuration does not support the use of a passphrase. Enter
the exact WEP key used by your access point.
Figure 6-6: Windows XP Zero Configuration - Active
Wireless Connection