LinMot E1250-PN-UC - User Manual

August 2019
Documentation of the PROFINET Interface of the following
Drives:
· C1150-PN-XC-0S/1S
· C1250-PN-XC-0S/1S
· C1450-PN-VS-0S/1S
· E1450-PN-QN-0S/1S
· E1250-PN-UC
Manual
PROFINET Interface
Doc.: 0185-1090-E_4V9_MA_PROFINET

Summary

System Overview

1.1 References

Lists user manuals and software references for further information.

1.2 Port Assignment

Explains the PROFINET network topology and physical port assignments.

Setup in a PLC

2.1 Create a New Project

Guides on creating a new PLC project in TIA Portal.

2.2 Configure PLC Device

Details the process of configuring the PLC device within the project.

2.3 Configure LinMot Drive

Instructions for installing GSD files and configuring the LinMot drive.

Process Data Object (PDO) Configuration

3.1 Bidirectional PDO Modules

Explains configuration of bidirectional PDO modules for data exchange.

3.2 Output PDO Modules

Details the output modules for process data transmission.

3.3 Input PDO Modules

Details the input modules for process data reception.

PROFINET Parameters

4.1.1 ProfiNet\Dis-;Enable

Configures enabling or disabling the PROFINET interface operation.

4.1.2 ProfiNet\Byte;Word Order\Byte Order

Sets the byte order for data transmission and reception.

4.1.3 ProfiNet\Byte;Word Order\Word Order

Sets the word order for data transmission and reception.

4.1.5 ProfiNet\Monitoring Channels

Configures source variables for the four monitoring channels.

PROFINET Network Connection

5.1 Pin Assignment of the Connectors X17-X18

Details the pinout configuration for PROFINET Ethernet connectors X17 and X18.

LinMot E1250-PN-UC Specifications

General

Communication	Profinet
Supply Voltage	24 V DC
Number of axes	1
Protection Class	IP20
Weight	1.2 kg
Operating Temperature	0 to 40 °C
Storage Temperature	-20°C to +70°C
Relative Humidity	Max. 85%, non-condensing