Linn AKURATE DS Installation And Setup Manual

www.linn.co.uk
AKURATE DS SYSTEM
INSTALLATION AND SETUP
1. OFF, ON
Mains power switch
2. POWER
Mains power inlet
3. EARTH GROUND
For connecting the unit to an earthing terminal if no mains
earth is available
4. ETHERNET
For connecting the unit to the network switch
5. FALLBACK
Used when reprogramming the unit
6. RS232 1 - 4
Port 1 is for connecting to a Linn Akurate Kontrol, port 2 for a Linn
Akurate CD. Ports 3 and 4 are currently not in use
7. BALANCED RIGHT/LEFT
For connection to a Linn Kisto or other pre-amplifier
8. ANALOGUE AUDIO OUTPUT
For connection to a Linn Akurate Kontrol or other pre-amplifier
7 AKURATE DS INSTALLATION (continued...)
1
Back panel
14
2 3 54
6 7 8

Linn AKURATE DS Specifications

General

Type	Network Music Player
Audio Formats	FLAC, WAV, MP3, WMA, AIFF, AAC, OGG
Streaming Services	Qobuz, Tidal
Digital Outputs	1 x S/PDIF
Analog Outputs	RCA
Network Connectivity	Ethernet
Sample Rates	Up to 24-bit/192kHz