Linn AKURATE DS Installation And Setup Manual

8 THE LINN CONFIG APPLICATION
www.linn.co.uk
AKURATE DS SYSTEM
INSTALLATION AND SETUP
The Linn Config application is used to configure the settings on the
Akurate DS and Akurate Kontrol.
1. Switch on the Akurate Kontrol and wait until the standby symbol is
shown on the display.
2. Switch on the Akurate DS.
3. Launch the Linn Config if you have not already done so.
4. Highlight the Akurate DS and wait until the Linn Config connects to
the unit. The ‘Version’ tab contains information on the Akurate DS
for use by Linn Service personnel.
16

Linn AKURATE DS Specifications

General

Type	Network Music Player
Audio Formats	FLAC, WAV, MP3, WMA, AIFF, AAC, OGG
Streaming Services	Qobuz, Tidal
Digital Outputs	1 x S/PDIF
Analog Outputs	RCA
Network Connectivity	Ethernet
Sample Rates	Up to 24-bit/192kHz