4
These are general guidelines and a little experimentation with positioning will optimise results for a
particular room. Your dealer will be pleased to do this when he installs your equipment.
The INDEX grille is special because it mounts directly onto the front facia of the speaker. This avoids the
problems of diffraction produced by conventional grille frames.
Bi-wiring improves the performance of a loudspeaker. By using a separate cable for the bass and treble
section, some interaction between the bass and treble section is removed. The extra cost of an
additional pair of loudspeaker cables is more than justified by the improvement in sound quality gained.
Because most amplifiers have only one speaker output you will have to double up the connection to the
speaker plug – your dealer will be pleased to supply the necessary leads for you, and to set up your
loudspeakers.
To convert the INDEX to single wired mode, use the key provided to unscrew the negative (black)
socket caps and fit the link provided. Replace and tighten the caps and then repeat for the positive (red)
sockets, and firmly re-tighten.
To Next Page
Loading...
