Need help?Do you have a question about the Linn Sondek LP12 and is the answer not in the manual?
General| Speed | 33 1/3 RPM, 45 RPM |
|---|---|
| Type | Belt-drive turntable |
| Motor | AC synchronous motor |
| Suspension | 3-point spring suspension |
| Dimensions | 445 x 356 x 140 mm |
| Bearing | Single-point bearing |
| Tonearm | Not included (typically Linn Ittok, Ekos, or similar) |
Details available upgrade components to enhance the LP12's performance.
Instructions for connecting the power cable to the Majik LP12 Power Supply unit.
Guidance on attaching the anti-skating weight loop to the tonearm.
Advice on floor and wall mounting for optimal stability and vibration isolation.
Addresses potential slow motor start in low voltage conditions for Majik LP12.
Steps for fitting and removing the 45 rpm adaptor and its associated drive belt.
Cleaning advice for plinth, platter, mat, top plate, and armboard.
Instructions for cleaning the motor pulley and drive belt.
Importance of bearing oil and procedure if oil is lost from the housing.
Method for cleaning the acrylic dust cover without scratching.
Maintaining stylus cleanliness and setting correct tonearm tracking weight.
Ensuring electrical contacts are clean and sound for signal quality.
Linn's advice on record cleaning methods and stylus care.
Detailed steps for packing the turntable for safe transit using original packaging.
Critical warning about removing bottom cover screws to prevent platter damage.
Technical details including platter, motor, drive, dimensions, weight, and plinth finishes.
Electrical operating voltage, frequency, and power consumption for Majik LP12.
Information on product guarantee, statutory rights, and online warranty registration.
How to obtain technical support and contact Linn offices for assistance.
To Next Page
