To Next PageTo Next Page
Need help?Do you have a question about the Linner NC50 and is the answer not in the manual?
General| Type | In-ear |
|---|---|
| Active Noise Cancellation | Yes |
| Bluetooth Version | 5.0 |
| Battery Life | 5 hours (earbuds), 20 hours (with charging case) |
| Charging Time | 1.5 hours (earbuds), 2 hours (charging case) |
| Driver | Dynamic |
| Frequency Response | 20Hz - 20kHz |
| Water Resistance | IPX5 |
Identifies and labels the physical parts of the headset using a diagram and a table.
Instructions on how to charge the headset using a USB cable.
Details the multifunction button actions for various headset states like connectionless and active calls.
Instructions on how to turn the headset on and off using the ON/OFF button.
Steps for pairing the headset with a mobile device via Bluetooth, including PIN code.
Explains the meaning of different LED light patterns for headset status like power, standby, and pairing.
Details how to activate and cycle through noise control modes and monitor mode.
Instructions for controlling music playback, specifically skipping to the next or previous song.
Information on how the headset can connect to and manage multiple Bluetooth devices simultaneously.
Guidelines for maintaining the headset and proper usage to prevent damage from liquids or heat.
Information on warranty claims, support contact, and details for after-sales service.
