– –
1
Introduction
The Linx TT Series Remote Control Transceiver modules offer a simple,
efficient and cost-effective method of adding remote control capabilities to
any product. The Master Development System provides a designer with all
the tools necessary to correctly and legally incorporate the TT Series into
an end product. The boards serve several important functions:
• Rapid Module Evaluation: The boards allow the performance of the Linx
TT Series modules to be evaluated quickly in a user’s environment. The
development boards can be used to evaluate the range performance of
the modules.
• Application Development: A prototyping board allows the development
of custom circuits directly on the board. All signal lines are available on
headers for easy access.
• Software Development: A programming dock with a PC interface allows
development and testing of custom software applications for control of
the module.
• Design Benchmark: The boards provide a known benchmark against
which the performance of a custom design may be judged.
The Master Development System includes 2 Carrier Boards, 2 RC Demo
Boards, 2 Programming Dock Boards, 2 Prototype Boards, 4 TT Series
transceivers*, antennas, batteries and full documentation.
TT Series Master Development System
User's Guide
Figure 1: TT Series Master Development System
* One part is soldered to each Carrier Board
Revised 1/13/14
To Next Page
Loading...