Linx 5900 - Page 247

Page 6 of 19 FA69386–2 English
Jun 2013
19
How To Use the Communications
Options
Linx 5900 & 7900
2.1.3 Configure RCI Setup
To configure Remote Communication Interface parameters for remote communications that
use buffered remote fields:
1 Select the RCI Setup option on the Protocol page to display the RCI Setup page.
The RCI Setup page contains the following options.
Figure 5. RCI Setup page
2 Highlight the required option and press the Select key to display the list of options
for your selection.
Print Mode option
Figure 6. Print Mode page
The Print Mode page contains the following parameters:
69473
69480