Linx 5900 - Page 42

Page 7 of 9 FA69335–3 English
Sep 2014
9
How To Change the Print Settings
Linx 5900 & 7900
2.1.6 Message Type
This option is only available on the 7900 printer. It enables you to manually select a different
raster type for a given message without the need to select that message on the Message
Editor page. This allows you to change the raster for a message more quickly to optimize
the appearance of the printed message. For more information, refer to the Linx 5900 & 7900
Quick Start Guide.
2.1.7 Message Orientation Mode
This option is only available on the 5900 Dairy Coder printer. It enables you to configure
message orientation settings for traversing applications. For more information, refer to How
To Use Dynamic Message Orientation.
2.1.8 Message Orientation
You can use this option to change the orientation of the printed message. You can select any
of the following four orientations:
• Normal:
• Horizontal Flip:
• Vertical Flip:
• Horizontal + Vertical Flip:
When you change the setting, the change applies only to the Current Message. You can use
a different setting for each message.
To change the Message Orientation:
This option is available in the ‘IDLE’ state and the ‘JET RUNNING’ state, but not in the
‘PRINTING’ state.
6109
6110
6111
6113