Page 14 of 23 FA69350–2 English
Jun 2013
23
How To Create a Production Schedule
Linx 7900
4 To print multiple prints from a single trigger, select the Production Schedule you
require from the Message Store. The Inter-Print Distance page is displayed.
Figure 16. Inter-Print Distance page
You must enter an inter-print distance for the messages in the schedule. This value
is the distance between the start of one message and the start of the next message.
5 You must then select a trigger for the Production Schedule as shown in ‘Trigger
setup’ on page 15.
NOTE: If you use the High Level or Low Level Primary or Secondary trigger
options, the Multiprint option is ignored. The Production Schedule returns
to the default printing option.
6 For the example Production Schedule shown in Figure 15, Message1 is printed four
times, followed by one print of Message2 and two prints of Message3 from one
trigger.
To Next Page
Loading...
