Linxcom LXMATFT1URM2UK User Manual

Linxcom UK Ltd, Unit 3 Stephenson Close, Daventry, Northamptonshire, NN11 8RF, United Kingdom
Reg. No. 07157746 Registered in England VAT No. GB 990 2417 16
Tel: +44 1327 705 425 Email: sales@linx-com.com Web: www.linx-com.com
Thermostatic Rack-Mount Fan Tray User Manual
Applicable Products
Type
Product Code
Image
2 Fan
LXMATFT1URM2UK
LXMATFT1URM2EU
LXMATFT1URM2US
LXMATFT1URM2IEC
4 Fan
LXMATFT1URM4UK
LXMATFT1URM4EU
LXMATFT1URM4US
LXMATFT1URM4IEC
Specifications
Temperature Measurement Range
-40°C to +99°C
Compressor Relay Capacity
10A
Power Supply
220VAC
Sensor
1x NTC Sensor
Accuracy
±1°C
Consumption
≤3W
Ambient Requirements
Temperature: -10°C to +60°C, Humidity 20-85% (No Condensate)
Display
SET Button
POWER Button
UP Button
DOWN Button
Digital
Display
WORK
Indicator
SET
Indicator

Linxcom LXMATFT1URM2UK Specifications

General

Brand	Linxcom
Model	LXMATFT1URM2UK
Category	Racks & Stands
Language	English

Summary

Applicable Products

Specifications

Display Overview

Indicators

Switching On/Off

Setting the Temperature

Setting Functions

Cooling/Heating

Fans operate in COOLING if displayed temp exceeds set temp. Fans operate in HEATING if displayed temp is less than set temp.

Lower/Higher Temperature Limit

Allows adjustment of the lower and higher temperature limits for fan operation.

Compressor Delay

Sets the delay for fan operation after last operation or powering on the unit.

Temperature Calibration

Enables user adjustment to display the correct temperature reading.

Errors