Need help?Do you have a question about the Lionel VISION Line700E Hudson and is the answer not in the manual?
General| Road Name | New York Central |
|---|---|
| Gauge | O Gauge |
| Engine Type | Steam |
| Power | Electric |
| Lighting | Yes |
| Sound | Yes |
| Features | Smoke, RailSounds |
Operating your locomotive using the LEGACY Command Base and CAB-2 Remote Controller.
Operating your locomotive using the TrainMaster Command Base and CAB-1 Remote Controller.
Operating your locomotive using a standard AC transformer without Command Control.
Locates and describes the volume control for the RailSounds system on the tender.
Instructions for adding smoke fluid to the main stack and whistle steam units.
Identifies and explains the functions of various switches on the locomotive.
Procedure for assigning a unique ID# for LEGACY or Command Control operation.
Instructions on how to link multiple locomotives to operate as a single unit.
Detailed overview of the buttons and features of the LEGACY CAB-2 Remote Controller.
Explains how to use the red rotary knob to control engine speed and momentum.
Details on using the Multi-Controller for direction, boost, and brake functions.
Describes the function of the Train Brake slider for slowing the train and its effect on smoke.
How to activate whistle and bell sounds using the Warning Sound Controller.
Using touch-screen keys to select prototypical preset speeds for the locomotive.
Adjusting sound and smoke effects (EFX) and understanding the bar graph display.
Instructions on how to exit the preset speed mode and return to the standard control panel.
Overview of the sound system features like Volume, CrewTalk, Water Injector, and more.
Automated sound effects for an entire trip based on locomotive movement and speed.
Manual control of engineer-dispatcher radio conversations and announcements.
Sample dialog scripts for manually controlled sound events during a train trip.
Details all commands and functions available on the CAB-1 Remote Controller.
Explains the use of the numeric keypad for specific sounds and operations.
Further commands for the CAB-1 numeric keypad, including smoke unit control.
Instructions on how to adjust the smoke production level using the remote.
How RailSounds features operate when using a conventional transformer.
Triggers for dialog based on whistle blasts and locomotive state in conventional mode.
Procedure to fix the locomotive's direction of travel, bypassing normal sequencing.
Overview of the Odyssey II Speed Control system as cruise control for the locomotive.
How Odyssey II Speed Control works with the LEGACY Control System (0-199 speed steps).
How Odyssey II Speed Control works with TrainMaster Command Control (resolution/momentum).
How Odyssey II Speed Control operates automatically in conventional mode.
Procedure to reset the locomotive to factory default settings when unresponsive.
Instructions and points for properly lubricating the locomotive's moving parts.
Information on locomotive LEDs and when professional service is required.
Step-by-step guide on how to replace worn traction tires on the drive wheels.
Instructions for swapping the coupler head for double-heading compatibility.
Guide for installing the scale pilot truck for a more prototypical appearance.
Explains built-in diagnostics for motor and smoke system issues and diagnostic codes.
To Next Page