Need help?Do you have a question about the Lionel Big Boy and is the answer not in the manual?
General| Road Name | Union Pacific |
|---|---|
| Wheel Arrangement | 4-8-8-4 |
| Power Type | Electric |
| Track Gauge | O Gauge |
| Features | Smoke |
Guide to operating the locomotive using a standard AC transformer.
Instructions for operating the locomotive with the TrainMaster Command Control system.
Steps to operate the locomotive using the advanced LEGACY Control System.
Details on running the locomotive using a standard AC transformer and its basic functions.
Step-by-step guide for operating the locomotive in a conventional environment.
Procedure to lock the locomotive into a single direction of travel using the command reverse unit switch.
How to couple the locomotive and tender using magnetic couplers in a conventional setup.
Description of the LEGACY RailSounds system and its capabilities in different operating environments.
Instructions for installing a nine-volt battery in the tender to ensure continuous sound system operation.
How to use the LEGACY RailSounds system features when operating in a conventional environment.
Instructions for installing Lionel Sound Activation Buttons if the transformer lacks whistle/bell controls.
Guide to activating CrewTalk dialog and TowerCom announcements triggered by whistle blasts.
How to use the LEGACY RailSounds system features when operating in the TrainMaster Command Control environment.
Explanation of the Odyssey II Speed Control system, its cruise control features, and slow speed capabilities.
Details on how Odyssey II operates automatically in conventional mode when the switch is ON.
How Odyssey II speed control operates and responds to commands from the Command Base.
Overview of using the CAB-1 Remote Controller to operate locomotives in Command Control.
Step-by-step guide to setting up and operating the locomotive in the TrainMaster Command Control environment.
Detailed list of commands available on the CAB-1 Remote Controller and their corresponding RailSounds effects.
Explanation of commands accessed via the numeric keypad on the CAB-1 Remote Controller.
Guide to fine-tuning the locomotive's chuff sounds and performance using the CAB-1 Remote Controller.
Instructions for setting a constant chuff intensity level manually.
How to adjust volume, momentum settings, and general speed using the CAB-1 Remote Controller.
Procedure to set the locomotive's maximum speed to prevent derailments.
Procedure to set the locomotive's minimum or stall speed.
Steps to assign a unique ID number to the locomotive for TrainMaster Command Control.
Procedure to reset the locomotive to factory default settings if it becomes unresponsive.
A quick start guide to powering up, addressing, and starting the engine's sound system in LEGACY mode.
Explanation of the Velocity Throttle, Multi-Controller, and Boost & Brake functions.
Details on using the Train Brake Slider for speed control and the Warning Sound Controller for whistle and bell.
Guide to selecting official railroad speeds using the Speed Bar on the touch-screen control.
Instructions for adding Lionel smoke fluid to the locomotive's smoke generator.
How to select low, medium, or high smoke output levels using the CAB-1 Remote Controller.
Guidance on lubricating the locomotive's moving parts to ensure proper performance and longevity.
Information on maintaining the handrail antenna and servicing or replacing locomotive lamps.
Instructions for replacing traction tires and installing flangeless tender wheel assemblies.
Procedure for installing the 'O' gauge front coupler.
Continuation of steps for installing the 'O' gauge front coupler.
How to remove and replace the removable coal load detail on the tender.
Instructions for assembling the red painted valve handwheels onto the locomotive.
Details on how to obtain service, understand the warranty terms, and fill out warranty information.
To Next Page