Table of contents
Quick Start
Transformer operations 4
TrainMaster Command Control operations 4
LEGACY Control operations 4
Conventional transformer operations
Conventional transformer operations 5
Operating your locomotive in the conventional environment 6
Locking your locomotive into a single direction 7
Coupling your locomotive in the conventional environment 8
LEGACY RailSounds sound system operations
LEGACY RailSounds sound system operations 9
Installing the battery 10-11
Using the LEGACY RailSounds sound system in the conventional environment 12
Installing a Lionel Sound Activation Button for conventional operation 13
Activating the CrewTalk dialog and TowerCom announcements
in the conventional environment 14
Using the LEGACY RailSounds sound system in the TrainMaster Command Control environment 15
Odyssey II Speed Control system operations
Odyssey II Speed Control system operations 16
Odyssey II Speed Control system conventional transformer environment operation 16
Odyssey II Speed Control system operation 16
TrainMaster Command Control operations
TrainMaster Command Control operations with CAB-1 Remote Controller 17
Operating your locomotive in the Command Control environment 17
CAB-1 Remote Controller commands 18
CAB-1 Remote Controller numeric keypad commands 19
Tuning your locomotive’s chuff intensity and performance 20-21
Assigning your locomotive a new ID# 22
Reprogramming your locomotive to restore features 23
LEGACY Control Systems operations
Quick Start 24-28
Maintaining and servicing your locomotive
Adding fluid to your locomotive’s smoke generator 29
Adjusting the smoke output 29
Lubricating your locomotive 30
Maintaining your locomotive’s handrail antenna 31
Servicing your locomotive’s lamps 31
Tire-Traction 32
Installing “Flangeless” tender wheel assemblies 32
Installing the O gauge front coupler 32-33
Removable coal load detail 33
Valve handwheel assembly 34
Notes 35
Limited Warranty/Lionel Service 36
3
To Next Page