Lionelo Cloe - Product Components and Assembly; List of Parts; Unfolding the Stroller; Front Wheel Installation and Removal

‑ 8 ‑EN
15. Use only spare parts supplied or recommended by the
manufacturer.
16. Do not use the product on stairs.
List of parts (g. A)
1. Handle
2. Headband
3. Harness
4. Basket
5. Locking mechanism
6. Footrest
7. Canopy
Unfolding the stroller
Note! Be careful when unfolding the stroller. Risk of nger pinching.
1. To unfold the stroller, grasp the handle (1, g. A), then dynamically pull the
handle upward. The stroller will unfold on its own (g. 1). The correct unfolding
of the stroller will signal a click on both sides of the stroller.
2. Fold or unfold the canopy (2, g. 1) as preferred.
Installaon and removal of front wheels
1.
Insert the front wheel stem into the corresponding holes in the frame of
the stroller (g. 2).
2. To remove the wheels, press the buon (A, g. 3) and pull them out of the
stroller frame.
Installaon and removal of the headband
1. Insert the headband into the appropriate holes on the stroller frame (g. 4).
Correct installaon will signal a click.
2. Press both release buons (A, g. 5), then pull out the headband.
Footrest adjustment
Pull the handle located under the footrest, then adjust the footrest to one of the
two available posions (g. 6).
Seat adjustment
Note! Do not adjust the seat when there is a child in the stroller.