Lionelo Cloe - Stroller Operation and Maintenance; Locking Mechanism Operation; Harness Usage and Adjustment; Folding the Stroller

‑ 9 ‑ EN
1. To unfold the seat to the reclining posion, pull the lever on the back of
the seat (g. 7).
2. To return to a sing or semi-reclining posion, push the seat forward unl
you hear a disncve click.
Locking mechanism
Note! Use the locking mechanism only as intended. Incorrect use may result in
permanent damage to the product.
1. To lock the front and rear wheels, push in the locking mechanism marked in
red, located on the right side of the frame (g. 8).
2.
To unlock, press the locking mechanism marked in green, located on the
le side of the frame.
The locking mechanism system used requires alternate operaon. Follow the
intuive signage: red – stop, green – go.
Harness
1. Combine the upper and lower parts of the clasp (g. 9a, 9b), and put the
whole into the main buckle (g. 10). A correct connecon will signal a click.
2. Adjust the length of the straps to the child’s body using the buckles located
on the straps (A, g. 10).
3.
To unbuckle the belts, press the buon located in the main buckle (B, g. 10).
Harness adjustment
To adjust the straps, remove the buckle through the hole located in the seat and
put it in the desired place (g. 11).
Make sure that the buckles are in the correct, stable posion aer reposioning
(g. 12).
Folding the stroller
1. To fold the stroller, press buon A and buon B at the same me (g. 13), then
push the handle forward (g. 14). The stroller will fold automacally (g. 15).
2. Press down on the stroller to make sure it is folded correctly.
Cleaning and maintenance
• The cover and basket can be hand-washed at 30°C.