Lionelo Natt - Unfolding the Stroller

‑ 9 ‑ EN
15. Use only spare parts supplied or recommended by the
manufacturer.
16. Do not use the product on stairs.
List of parts (g. A)
1. Handle
2. Folding lever
3. Lock
4. Seat adjustment strap
5. Rear wheels
6. Front wheels
7. Footrest
8. Safety bar
9. Harness
10. Canopy
11. Viewnder
12. Basket
13. Parking device
Unfolding the stroller
To unfold the stroller, remove the locking mechanism (g. 1, 1A), then grasp the
handle and dynamically pull it upward. The stroller will unfold on its own (g. 1B).
A click will signal the correct unfolding of the stroller.
Installaon and removal of front wheels
Note! Pay aenon to the installaon of the le and right wheel on the correct
side of the stroller frame. Make sure that the bolt inside the wheel is on the
inside of the frame.
1.
Insert the front wheel stem into the corresponding holes in the frame of
the stroller (g. 2).
2.
To lock the wheels for straight-ahead travel, move the lock (g. 3) in the
outward direcon. To unlock, move the lock towards the inside.
3. To remove the front wheels, press the buon (g. 4) and pull them out of
the stroller frame.
Installaon and removal of rear wheels
1. Insert the rear wheel stem into the corresponding holes in the stroller frame
(g. 5).
2. To remove the rear wheels, pull the metal handle (g. 6) and pull them out
of the stroller frame.