Lionelo sander - Seat Components and ISOFIX Fixing; Component Description; ISOFIX Fixing System; Positioning ISOFIX Handles

‑ 11 ‑ EN
• Protect the child safety seat against sunlight. Otherwise, the seat may be too
hot for your child’s skin.
• Never leave your child unaended in the restraint system.
•
Luggage and other objects that can cause injury in the event of a collision
should be properly secured.
•
Child restraints without upholstery should not be used. It is not allowed to
replace the seat upholstery other than recommended by the manufacturer,
because it is an integral part of the device that aects its funconing.
• Keep the seat user manual when using the device. Keep it in the car in which
the product is mounted.
• Do not use load bearing points of contact other than those described in the
instrucons and marked on the child restraint.
• If you have doubts about the posion of the adult seat belt buckle relave to
the main load-bearing points, contact the child restraint system manufacturer.
• For installaon with ISOFIX: refer to the vehicle manufacturer’s operang instrucons.
Descripon (g. 3, 4)
A. Headrest
B. Belt guide
C. Belt pad
D. Safety belt
E. Buckle
F. Adjustment strap
G. Posion changing lever
H. ISOFIX Fixed lock
I. Safety seat casing
J. Top tether strap
K. Five-point safety belt
L. Safety belt connector
M. ISOFIX handle
N. ISOFIX adjustment buon
O. ISOFIX arms
ISOFIX xing
ISOFIX is the system of connectors enabling the installation of safety seats in
a vehicle. It is composed of two handles located between the seats and the
backrest. These handles are attached directly to the structure of the vehicle.
In relaon to belts, ISOFIX guarantees more rigid xing, which translates into increased safety.
The safety seat is equipped with ISOFIX xing system (including two boom
ISOFIX connectors and upper strap – TOP TETHER).
Posion ISOFIX handles in a relevant place (the safety seat can also be mounted