Installation for Group I (9-18kg) - after the ISOFIX assembly
Group I: Securing a child with a 5-point safety harness
Pull out the vehicle’s 3-point safety belt. The vehicle’s lap belt should be
carried through the guide hook and
under the armrest.
Make sure the safety seat is properly
secured on the car seat.
Press the red button on the 5-point
safety belt buckle to unfasten it.
Carry the vehicle’s lap belt under the safety
seat and run it through the guide hook on
the other side.
Run the vehicle’s shoulder belt
through the holes on the backrest of
the seat, as shown in the picture.
Lock the metal end of the vehicle’s
seat belt in the car buckle.
Tighten the belt and check whether the
safety seat is firmly mounted. If it is
loose, tighten the belt again.
Put the two parts of the bucket and
their straps on the armrests so that
they don’t block the seat. Then,
place your child in the safety seat.
CLICK
Insert the two metal connectors into
the bucket. The “click” sound
indicates that the safety harness has
been properly fastened. Make sure
that the harness is properly secured.
Put the two metal connectors together.
5-point safety harness
adjustment
Please, find more details on the
next page.
To Next Page
Loading...
