How to tighten / loosen the 5-point safety harness
5-point safety harness height adjustment
Pull out the adjustment strap to
tighten the 5-point safety harness.
Use one hand to press the
adjustment button.
You can disassembly and remove the
5-point safety harness if the child
weights more than 15 kg or is taller
than 1 meter.
The harness should be adjusted so
that there is a two-finger gap between
it and the child. It must be neither too
tight nor too loose.
If it is necessary, press the
adjustment button and pull the
harness to loosen it.
Unfasten the 5-point safety
harness.
Pull the straps out of the safety
seat.
Insert the two shoulder straps into the
connector at the back of the safety
seat and finish the adjustment.
Remove the two shoulder straps from
the harness connector at the back of
the safety seat.
Choose a desirable height and slide the
straps through the corresponding holes.
To Next Page
Loading...
