Lionelo SEM - Group II and III Installation; Group II Installation (15-25 kg); Group III Installation (22-36 kg)

24
25
Installation for Group II (15-25kg) Installation for Group III (22-36kg)
Remove the 5-point safety harness.
Mount the safety seat using the
ISOFIX connectors.
Carry the vehicle’s belt under the
armrest, over the child’s body and
under the other armrest.
Carry the vehicle’s shoulder belt
according to the instruction in the
picture.
Place your child in the safety
seat.
Run the vehicle’s shoulder belt
across the child’s chest.
CLICK
Fasten the vehicle’s belt locking the
metal connector into the vehicle’s
buckle. Then, tighten the belt slightly
to finish the installation.
Remove the 5-point safety harness
.
Mount the safety seat using the
ISOFIX connectors.
Carry the vehicle’s belt under the
armrest, over the child’s body and
under the other armrest.
Run the vehicle’s belt through the red
guide hook at the top of the safety
seat.
Adjust the height of the headrest so
that it is the most suitable for your
child.
Run the vehicle’s shoulder belt across
the child’s chest.
CLICK
Fasten the vehicle’s belt locking the metal
connect or into the v ehi cle’s buckl e. Then,
tighten the belt slightly to finish the
installation.