Lippert Components 329164 - User Manual

Rev: 01.25.2017
Page 1
TI-209
WIRELESS TOUCH SCREEN GUIDELINES
TI-209
ELECTRONICS
Fig. 2 Fig. 3Fig. 1
Purpose
This feature was added to the wireless remotes to provide personalized security for the remote, as well as a
safety feature to prevent inadvertent activation of functions. To utilize this set of guidelines, the unit MUST
be equipped with a multifunction board and the touch screen remote. These guidelines do not apply to any
other remote.
To reset PIN Code
1. Press "HOME" button to turn on transmitter.
2. Press and release "HOME" button five times.
3. Press "CONFIG" (Fig. 1).
4. The screen will ask you if you want to reset the screen lock PIN code (Fig. 2).
5. The screen will notify you that a PIN has been reset (Fig. 3).
Fig. 4 Fig. 5 Fig. 6
NOTE: To start programming over, push and hold the "Home" button for 5 secs to turn off the remote. Push
the "Home" button again to turn the remote back on and restart the programming procedure.
6. Press "Home" button and touch "Set PIN" button (Fig. 4).
7. Enter 4-digit code of your choice (Fig. 5).
8. Touch "Save" button (Fig. 6).
Home
Button
CONFIG
Button
Set PIN
Button
SAVE
Button

Summary

Purpose of Wireless Touch Screen

Resetting the PIN Code

Procedure for PIN Reset

Step-by-step instructions for resetting the screen lock PIN code on the wireless remote.

Navigating Menu Screen Options

Selecting Menu Functions

Instructions on selecting functions, navigating forward, and returning to previous menu screens.

Operating Light Functions

Description of how to turn light functions on and off via the menu screen.

Operating Slides and Awnings

Component Operations

How to enter function operations screen and use controls for slides, awnings, etc.

Remote Sleep Mode

Information on the remote entering sleep mode after a period of inactivity.

Lippert Components 329164 Specifications