Rev: 10.18.21 Page 22 CCD-0004098
3. Attach the bungee (Fig. 51A) onto the front driver's side and curbside brackets (Fig. 51B), holding the
patio railings to the ramp door.
4. Utilize one person to raise the ramp door from the ramp position to parallel with the ground at a 90
degree patio position.
5. Utilize a person to support the ramp door while another person attaches the door cables (Fig. 52A) to
the door cable brackets (Fig. 52B) with the retainer pins (Fig. 52C), on both sides of the ramp door.
A
C
B
Fig. 52
Fig. 51
A
B
To Next Page
Loading...