Rev: 10.27.22 Page 2 CCD-0005287
TABLE OF CONTENTS
Introduction 2
Safety 3
Prior to Operation 4
LED Touchpad Controller Operation 4
Troubleshooting 8
Manual Override - Jacks 8
Manual Override - Power System 8
Audible Alarm Modes 9
Preventative Maintenance Procedures 9
Fluid Recommendation 9
Level Zero Point Calibration 10
Solutions to Possible System Errors 13
Optional Crossbar Lights Wiring Diagram 14
Hydraulic Plumbing Diagram 15
LED Wiring Diagram 16
Notes 17
Introduction
The Basecamp hydraulic leveling system was designed for use only on a Sprinter chassis. The four-point,
four-valve hydraulic leveling system is a hydraulic system which includes four points of contact utilizing four
jacks and a four-valve hydraulic system. A 12V DC electric motor drives a hydraulic pump that moves fluid
through a system of hoses, fittings and jacks to level and stabilize the coach. Mechanical portions of the
hydraulic leveling system are replaceable. Contact Lippert to obtain replacement parts.
Additional information about this product can be obtained from lci1.com/support or by downloading
the free LippertNOW app. The app is available on Apple App Store® for iPhone® and iPad® and also on
Google Play™ for Android™ users.
Apple App Store®, iPhone®, and iPad® are registered trademarks of Apple Inc.
Google Play™ and Android™ are trademarks of Google Inc.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/hydraulic-leveling-4-point-4-valve-sprinter
NOTE: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
To Next Page
Loading...
