Lippert Floe 868 User Manual

8 pages

To Next Page

lippert.com 432-LIPPERT (432-547-7378) Rev: 08.22.22

Floë

838 Integrated

Water Drainage System

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004086

Table of Contents

Introduction ............................................ 1

Safety ................................................... 2

Resources Required ................................... 2

Parts Lists .............................................. 2

Installation of Model 868 ............................... 2

Preparation ............................................ 2

Attach Box to Wall ..................................... 3

Connect Tee Fitting, Hoses ............................ 4

Connect to Power Supply .............................. 4

Test For Air Leaks ..................................... 4

Operation ............................................... 5

General Guidelines for Model 868 ..................... 5

Model 868 operation ................................... 6

Drain Irrigation Systems ............................... 7

Home/Model Home Water System Diagram ........... 7

Troubleshooting ........................................ 8

Floë 868

Induratec

Integrated

115V AC Water

Drainage System

Installation and

Owner’s Manual

(For Aftermarket Applications)

Floë Water Drain KitFloë Water Drain Kit

Part #Part # DescriptionDescription

809128 Model 868 115V AC water drainage system

Introduction

Floë is a water drainage device that will remove residual

water trapped in water supply systems in RVs and homes.

This will prevent the pipes from freezing in the winter and

also flush out stale water in the summer. Additionally, it will

remove dirt and lime scale from water heaters.

Additional information about this product can be obtained

from lci1.com/support or by using the LippertNOW app.

Replacement kits can be ordered from https://store.lci1.

com/ or by using the LippertNOW app.

The LippertNOW app is available for free on Apple App

Store

for iPhone

and iPad

and also on Google Play

™

for

Android

™

users.

App Store

and iPad

are registered trademarks of Apple

Inc.

Google Play

™

and Android

™

are trademarks of Google Inc.

Questions and Answers:

T
Thomas JacobsAug 20, 2025
Why does Lippert Water System Floë run too long?
- P
  peckmichelleAug 20, 2025
  If the Lippert Water System's Floë runs for more than two to three minutes, it might be due to an air leak from the toilet. To resolve this, switch off Floë and ensure all faucets and outlets are closed, and that no toilets have been flushed. Listen near the toilet tank for escaping air. Turn the water supply valve by the toilet tank to the horizontal position to shut off the water. Then, switch on Floë. If the motor stops, the system is now pressurized.