7
lippert.com 432-LIPPERT (432-547-7378) Rev: 09.23.21
Flow Max
TM
Faucets
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0001241
Troubleshooting Chart
Vibration caused by driving or transporting can loosen plumbing and hardware. Check for loose system components.
Many symptoms can be resolved by tightening hardware. Use care not to over-tighten. Refer to the chart for
troubleshooting tips.
Maintenance
Clean the faucet periodically with a soft cloth. Avoid
abrasive cleaners, steel wool and harsh chemicals as
these will dull the nish and void the warranty.
6. To shut the water o push the lever in towards the faucet
(Fig.17).
A
What is happening?What is happening? Why?Why? What should be done?What should be done?
Irregular Flow
Blockage at the aerator.
For further instructions:
Reference: CCD-0004351
Cartridge is clogged.
For further instructions:
Reference: CCD-0004317
There is a leak from the aerator
when the faucet is on.
The aerator does not fit correctly on the
faucet.
Remove aerator and re-install.
The aerator has irregular or
reduced water flow.
The aerator is dirty. Remove aerator and clear debris.
Fig.17
To Next Page
Loading...