Rev: 07.25.18 Page 2
CCD-0001504
TABLE OF CONTENTS
System and Safety Information 2
Preparation 3
Criteria for Determining Use of Ground Control® 3.0 4 Point or 6 Point System 3
4 Point Application 3
6 Point Application 3
Determining the Mounting Position of the Controller and Rear Sensor 4
Controller 4
Rear Sensor 4
Measuring Departure and Approach Angle 4
Installation 5
Rear Jacks 5
Rear Sensor 5
Controller 7
Touch Pad 8
Wiring Diagram - 4 Point 9
Wiring Diagram - 6 Point 10
Prior to Operation 11
Touch Pad Diagram 11
Basic Jack Operation 12
System Settings 12
Homing Jacks 12
Zero Point Calibration 13
Operation 13
Unhitching from a Tow Vehicle 13
Auto Level 14
Auto Level Sequence 14
Troubleshooting 15
Touch Pad Error Codes 15
Special Jack Error Codes 16
Preventive Maintenance 16
Notes 17
To Next Page
Loading...
