Lippert SolidStep Entry Assist Handrail - Purchase Verification; Introduction

2
lci1.com 574-537-8900 Rev: 08.01.19
SolidStep
®
Entry
Assist Handrail
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002520
Introduction
The SolidStep Entry Assist Handrail mounts securely to
the inside of the step. The Entry Assist Handrail can be
mounted on the left or right side of the step, depending
on whether the door hinge is installed to the left doorjamb
or right doorjamb. An additional installation of a backer
plate to the outside of the steps gives added support and
stabilization. The Entry Assist Handrail can be easily
removed or left in place when storing if clearance allows
inside the trailer. The Entry Assist Handrail is height
adjustable to maximize comfort and ensure that larger
doors don’t strike the Entry Assist Handrail while being
opened or closed.
Additional information about this product can be obtained
from lci1.com/support or by using the myLCI app.
Replacement kits can be ordered from https://store.lci1.
com/ or by using the myLCI app.
The myLCI app is available for free on iTunes
®
for iPhone
®
and iPad
®
and also on Google Play
™
for Android
™
users.
iTunes
®
, iPhone
®
, and iPad
®
are registered trademarks of
Apple Inc.
Google Play
™
and Android
™
are trademarks of Google Inc.
Purchase Verification
The SolidStep Entry Assist Handrail will ONLY work with
triple and quad SolidStep 3.0 (Fig.1). The SolidStep Entry
Assist Handrail will NOT work with double SolidStep 3.0
or with previous versions of SolidStep - including SolidStep
Gen 2 (Fig.2). The SolidStep Entry Assist Handrail will not
work with any other LCI step or any other brand of step.
NOTE: SolidStep 3.0 has solid side rails (Fig. 1). SolidStep
2.0 has open side rails (Fig.2).
Fig.1
Fig.2
SolidStep 3.0
SolidStep Gen 2