What to do if tie-down strap does not reach the saddle on Lippert SureShade Power Bimini 2021013744?
If the tie-down strap doesn't reach the saddle, it could be due to the saddle being mounted too far away. Try relocating the saddle. Alternatively, the tie-down strap may not be extended enough. In this case, adjust the tie-down strap buckle to increase the strap length.
Why fly extension stanchions do not reach the locking plates on Lippert SureShade Power Bimini 2021013744 Boating Equipment?
The fly extension stanchions may not reach the locking plates because the fly extension is not fully extended. Make sure to fully extend the fly extension. Another reason could be that the bimini top is not fully extended, so ensure it is. Also, check if the locking plates are mounted too far away; if so, relocate them.
What to do if tie-down strap clip does not close on saddle or stanchion on Lippert SureShade Power Bimini 2021013744 Boating Equipment?
If the tie-down strap clip does not close on the saddle or stanchion, the most likely cause is a bad spring clip. Replace the tie-down strap to resolve this issue.
Consolidates all warning and caution statements for safe operation and installation.
Step-by-step guide for installing the front fly extension.
Procedure for installing the fly extension in the rear position.
Instructions for operating the front fly extension.
Instructions for operating the fly extension in the rear position.
Procedure for storing the fly extension.
Guidelines for cleaning and maintaining the fly extension fabric.
General| Brand | Lippert |
|---|---|
| Model | SureShade Power Bimini 2021013744 |
| Category | Boating Equipment |
| Language | English |
To Next Page
