Need help?Do you have a question about the Lista Code Lock and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Programming | Keypad |
| Material | Metal |
| Battery | 4 x AA |
| Dimensions | 150mm x 70mm x 30mm |
Covers essential safety warnings, temperature limits, and ESD precautions.
Information regarding the proper disposal of the product.
Identifies key components like batteries, compartment, knob, and LED.
References to Code Lock and RFID Lock sections.
Explains LED status for unlocking and errors.
Describes the function of the programmable badge for user management.
Describes the function of the user badge for opening the cabinet.
Lists the factory pre-installed LISTA Werkscode 1 2 3 4 5.
Instructions for unlocking the device for the first time.
Procedure to enter and confirm an 8-digit Lock-ID.
Reminder to write down the Lock-ID for future reference.
Instructions for entering user codes into the provided table.
Steps to teach new users or program user codes.
Procedure for inputting user codes (2-100).
Instructions for removing user codes from the system.
Lists the factory pre-installed LISTA Werkscode 1 2 3 4 5 for RFID.
Instructions for unlocking the RFID device for the first time.
Procedure to enter and confirm an 8-digit Lock-ID for RFID.
Reminder to write down the RFID Lock-ID.
Steps to create a programmable badge for RFID system.
Procedure to re-enter the 8-digit Lock-ID for RFID programming.
Instruction to hold badge near the antenna for RFID programming.
Process for programming a user badge to the RFID system.
Instructions for holding badges to the antenna for RFID user management.
Steps to remove a user badge from the RFID system.
Instructions for holding badges to the antenna for RFID deletion.
Procedure to reset all settings to factory defaults.
Alert regarding deletion of all parameters during reset.
Instructions on how to disable the device's audible feedback.
Instructions to adjust the sound volume to a low setting.
Instructions to adjust the sound volume to a loud setting.
Procedure for replacing modules in Code Lock models from 2016.
Step to remove drawers to access the module for replacement.
Guidelines for ensuring Electrostatic Discharge protection during maintenance.
Details regarding the Key-Lock mechanism.
Instructions for inserting a new module into the lock.
Information on the expected duration of battery usage.
Crucial reminder to correctly orient batteries during installation.
Confirmation that user codes are preserved after battery change.
Troubleshooting steps for when the lock does not react.
Solutions for problems entering the Lock-ID.
Troubleshooting steps for entering user codes.
Causes and solutions for a non-rotating rotary knob.
Troubleshooting for non-functional beeper or LED.
Solutions for when user badges do not open the lock or cannot be taught-in.
To Next Page
