Verify the Tablet is charged and functional:
► Start the “Certifier” app on the tablet by clicking on the proper icon.
► Only one electrical circuit operates at one time. Pressing a different 2
nd
key cancels the
previous. Pressing the same key 2 times without hitting any other key cancels that function.
► The actions of the tablet parallel that of the tester’s GUI.
► Activating a function via the tablet will illuminate the respective LED on the 1200 GUI display.
► The tablet can be programmed to operate with only one tester.
If you experience interference between tester systems and the tablet, contact LITE-CHECK
Technical Support for assistance at 1-800-343-8579.
INTERPRETING PANEL DISPLAYS, INDICATORS AND ALARMS
General:
The 1200 Certifier utilizes two on-board means of communicating with its operator:
1. Graphical User Interface (GUI) of the Certifier 1200 application loaded onto the PC
2. Audio Alarm with pitch-coded sound for faults
Lite-Check CERTIFIER 1200 Operations Manual
16
Switch Indicators, LED:
Indicators on the GUI will be activated whether circuit is activated by the Tablet or from the GUI.
► Steady indicator: Switch and circuit activated.
► Flashing indicator: Fault condition found in circuit being tested.
Audio Alarms:
► Fault alarm (Unique pitch assigned to each specific fault type)
To Next Page
Loading...
