Litecraft LED PAR 64 AT3 User Manual

LED PAR 64 AT3
MANUAL
Thank you for purchasing this LITECRAFT product. For your own safety, please
read the instruction manual carefully before turn on the product for the first time.
SAFETY NOTES
• Each person which is responsible for the installation, the use or service
of this unit must be:
- qualified
- has to follow the instructions in this manual.
• WARNING! Be careful when using the device. You risk an electrical
shock from high voltage, if you touch the wires!
• The device has left our company in manufacturer proofed state. To
maintain this status and to ensure a permanent safe operation, it is
absolutely necessary to follow the safety instructions and warnings in
this manual.
• IMPORTANT: Errors, caused by not following these instructions are not
covered by the warranty. The manufacturer will not accept liability for any
resulting defects or problems.
• Keep the unit away from radiators or other heat sources!
• If the unit has been exposed to tremendous temperature changes (e.g.
after transportation), do not turn it on immediately. The resulting
condensation could damage the unit. Don`t switch unit on until the
device reaches room temperature.
• This device belongs to protection class I. Therefore, it is imperative that
the green/yellow wire is connected to the earth contact of the plug. The
electrical connection must be made by a qualified person.
I

Litecraft LED PAR 64 AT3 Specifications

General

Brand	Litecraft
Model	LED PAR 64 AT3
Category	Lighting Equipment
Language	English

Summary

Safety Precautions

General Safety Guidelines

Covers electrical safety, proper installation, maintenance, environmental factors, and grounding requirements for safe operation.

Operational Safety Warnings

Includes warnings about cable integrity, lens replacement, wire contact, voltage, disconnecting the unit, initial use smoke, burns, and health risks.

Operation Modes

DMX and Stand-Alone Modes

Explains DMX control for multiple devices, slave mode setup, and display indications for signal presence.

Button Controls and Settings

Details the function of MODE, UP, and DOWN buttons for selecting modes and adjusting values, including auto-storage.

Control Modes and Specifications

DMX Control Modes Description

Details DMX channel modes (1, 2, 3, 7) and their functions, including color macro, dimming, strobe, and mode selection.

Audio Control Modes Description

Explains audio-triggered color changing, manual color macro, program chasers, and program speed settings.

Technical Specifications

Lists electrical specifications like voltage, power consumption, dimensions, weight, and fuse rating.