Litecraft PowerBar 4 User Manual

PowerBar 4
Manual
Thank you for purchasing this LITECRAFT product. For your own safety, please read
the instruction manual carefully before turn on the product for the first time.
SAFETY NOTES
• Each person which is responsible for the installation, the use or service of this
unit must be:
- qualified
- has to follow the instructions in this manual.
• WARNING! Be careful when using the device. You risk an electrical shock
from high voltage, if you touch the wires!
• The device has left our company in manufacturer proofed state. To maintain
this status and to ensure a safe operation, it is absolutely necessary to follow
the safety instructions and warnings in this manual.
• IMPORTANT: Errors, caused by not following these instructions are not
covered by the warranty. The dealer will not accept liability for any resulting
defects or problems.
• Keep the unit away from radiators or other heat sources!
• If the unit has been exposed to tremendous temperature changes (e.g. after
transportation), do not turn it on immediately. The resulting condensation could
damage the unit. Don`t switch unit on until the device reaches room
temperature.

Litecraft PowerBar 4 Specifications

General

Type	LED Bar
Number of Channels	4
Input Voltage	100-240V AC, 50/60Hz
Weight	3.5 kg
LED Source	RGBW
Control	DMX
Connector Type	PowerCON

Summary

Safety Notes

General Safety Precautions

Essential safety guidelines for installation, use, and maintenance of the device.

Electrical and Operational Safety

Safety Guidelines

Emphasizes electrical connection safety, cable handling, and device operation precautions.

Operation Modes

DMX and Slave Mode Configuration

Details DMX and slave mode setup, connections, and address settings.

Display and Control Functions

Explains display indicators, button operations for mode selection, and address setting.

Audio Sensitivity Control

Describes the function of the sensitivity knob for audio mode operation.

Control Modes and DMX Details

DMX Mode Configurations

Details DMX channel configurations, address settings, and functions for various DMX modes.

Manual and Audio Mode Functions

Explains manual operation modes like color macro, dimmer programs, and audio-driven dimming.

Technical Specifications