EasyManua.ls Logo

Litecraft PowerBar 4 - Electrical and Operational Safety; Safety Guidelines

Litecraft PowerBar 4
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This device belongs to protection class I. Therefore, it is imperative that the
green/yellow wire is connected to the earth contact of the plug. The electrical
connection must be made by a qualified person.
Make sure that the cable is never never squeezed or damaged by sharp
objects. Check the device and the cables regularly.
If the cable is damaged, it must be replaced immediately by the manufacturer,
its service agent or a qualified person in order to avoid danger.
Lenses, glasses or UV filters must be replaced if they are visually damaged, or
their effectiveness is impaired, e.g. by broken glass or by deep scratches.
Ensure that wires never come in contact with other wires! Handle the power
cord and all connections with caution!
Make sure that the line voltage is not higher than the voltage specified in this
manual.
Disconnect the unit from the AC mains when it is not in use or when cleaning
it. Disconnect the connection only by pulling the cable plug.
Using the fixture for the first time, can result in light smoke and odors. This is a
normal process and does not constitute a defect.
RISK OF BURNS! Do not touch the unit during operation! The housing may
reach high temperatures.
RISK TO HEALTH! Never look directly into the light source. Epileptics risk an
epileptic shock! Disconnect the unit from the AC mains when not in use or
when cleaning it.
Defects caused by modifications of the device by unqualified handling or an
unqualified person are not covered by the warranty.
Keep the product away from children and unskilled people.
There are no wear parts in the device. Maintenance and service must be
performed only by an authorized service partner.

Related product manuals