Litecraft PAR 64 AT10 User Manual

PAR 64 AT10
MANUAL
Thank you for purchasing this LITECRAFT product. For your own safety, please
read the instruction manual carefully before turn on the product for the first time.
SAFETY NOTES
• Each person which is responsible for the installation, the use or service
of this unit must be:
- qualified
- has to follow the instructions in this manual.
• WARNING! Be careful when using the device. You risk an electrical
shock from high voltage, if you touch the wires!
• The device has left our company in manufacturer proofed state. To
maintain this status and to ensure a permanent safe operation, it is
absolutely necessary to follow the safety instructions and warnings in
this manual.
• IMPORTANT: Errors, caused by not following these instructions are not
covered by the warranty. The manufacturer will not accept liability for any
resulting defects or problems.
• Keep the unit away from radiators or other heat sources!
• If the unit has been exposed to tremendous temperature changes (e.g.
after transportation), do not turn it on immediately. The resulting
condensation could damage the unit. Don`t switch unit on until the
device reaches room temperature.
• This device belongs to protection class I. Therefore, it is imperative that
the green/yellow wire is connected to the earth contact of the plug. The
electrical connection must be made by a qualified person.
I

Litecraft PAR 64 AT10 Specifications

General

Brand	Litecraft
Model	PAR 64 AT10
Category	Flood Light
Language	English

Summary

Safety Notes

General Safety Precautions

Essential safety instructions including personnel qualifications, handling high voltage, and unit protection.

Operation

DMX and Stand-Alone Modes

Details on connecting multiple devices in DMX mode and accepting controller settings.

Slave Mode Connection

Instructions for connecting a slave device to a master device via DMX.

Display and Button Functions

Explanation of the display content and how to navigate modes and settings using buttons.

Control Modes / DMX Description

Display Modes

Describes various display settings like software version, default settings, and permanent display.

DMX Channel Modes

Details on DMX modes from 1 to 8 channels, including color macro and dimmer functions.

Manual Modes

Explanation of manual modes for color macro, program selection, speed, and color set adjustments.

Special Functions

Details on setting specific colors (red, green, blue, amber) and fixture hour counter.

Macro Value Overview

Color Macro Definitions

A detailed table showing the value assignments for red, green, blue, and amber for each color macro.

Technical Specification

Device Specifications

Lists voltage, power consumption, measurements, weight, and fuse rating for the unit.