Little Giant BSC33 - User Manual

BSC33 & BSC50V Euent Pumps
OWNER'S MANUAL
English
EN
This submersible pump is for use in basins or lift stations and is suitable for
pumping clear water or effluent gray water with up to ⅜-inch (9.53 mm)
spherical semi-solids. Do not use the pump in applications where sewage or
any other debris (gravel, sand, floating debris, etc.), abrasives, or corrosives are
present.
The pump motor is equipped with an automatic resetting thermal protector
and may restart unexpectedly. Protector tripping indicates motor overloading
or overheating, which can be caused by application issues such as an
obstructed pump impeller, switch stuck in the ON position, pump running dry,
pump air-locked, pump short cycling, excessively high or low voltage supply, or
possibly a pump, motor, bearing, or seal that have reached the end of their use-
ful life.
This product is covered by a Limited Warranty for a period of 2 years from the date of original purchase by
the consumer. For complete warranty information, refer to www.LittleGiant.com
.
Specifications
Flow Rates
On/Off Levels
Model HP Volts Hz
Full Load
Amps
Watts
Cord
ft (m)
BSC33V
1/3
115 60
4.3 400
10
(3.05)
BSC33T
BSC33T
30
(9.14)
BSC50V 1/2 5.3 507
10
(3.05)
Model
Gallons (Liters) per Hour at Height
Shut Off
ft (m)
PSI (Bar)
5 ft (1.5 m) 10 ft (3.0 m) 15 ft (4.6 m) 20 ft (6.1 m)
BSC33V
50
(189)
41
(155)
31
(117)
16
(61)
25
(7.62)
10.8
(0.74)
BSC33T
BSC50V
64
(242)
50
(189)
37
(140)
24
(91)
28
(8.5)
12.1
(0.83)
Model
On
inches (cm)
Off
inches (cm)
BSC33 Tethered Float Switch
12.0 - 14.0
(30.48 - 35.56)
4.0 - 6.0
(10.16 - 15.24)
BSC33 Vertical Float Switch
6.0 - 8.0
(15.24 - 20.32)
1.8-3.8
(3.30 - 5.84)
BSC50V

Little Giant BSC33 Specifications