JPC Convertible Jet Pumps
OWNER'S MANUAL
English
EN
This pump is designed to be used with shallow wells down to
25 ft (7.6 m) and deep wells down to 90 ft (27.4 m), lower
depths at high altitudes. The pump includes an injector kit,
which consists of a cast iron injector assembly that has a
nozzle and venturi threaded into it. This injector assembly is
set up for shallow well use. Additional venturis are included
for deep well applications. The venturi and nozzle are
designed specifically for certain depths to optimize performance. The injector assembly should always be
replaced at the same time the pump is replaced.
This product is covered by a Limited Warranty for a period of 1 year from the date of original purchase by
the consumer. For complete warranty information, refer to www.LittleGiant.com
.
Specifications
Venturi & Nozzle Specifications
Model Volts Amps Max PSIG HP Phase Suction Discharge
JPC-050-C
115 12.4
85 1/2
Single 1.25 inch FNPT 1-inch FNPT
230 6.2
JPC-075-C
115 14.8
86 3/4
230 7.4
JPC-100-C
115 17.0
87 1
230 8.5
Application
Pumping
Depths
ft (m)
Injector
location
HP Nozzle Venturi HP Nozzle Venturi
Shallow Well
0 - 25
(0 - 7.6)
Bolted to Pump
1/2
247292
(Blue)
247285
(Black)
3/4, 1
469022
(Green)
247288
(Brown)
Deep Well
20 - 40
(6.1 - 12.2)
45' in the well
20 - 90
(6.1 - 27.4)
95' in the well
247261
(Blue)
247294
(White)
247300
(Purple)