Do you have a question about the Little Tikes 620089X2CP and is the answer not in the manual?
Material | Plastic |
---|---|
Maximum number of kids | 3 |
Assembly Required | Yes |
Manufacturer | Little Tikes |
Model Number | 620089X2CP |
Recommended Age | 24 months - 6 years |
Weight Limit | 50 pounds per child |
Color | Multi-color |
Included Components | Climber |
Critical warnings regarding electrical hazards and adult supervision for operation.
Failure to follow instructions may lead to serious injury or death.
Keep electrical devices away from the inflatable; do not place near overhead electrical lines.
Repair patches are for adult use only and must be kept away from children.
Instructions for cleaning, cutting, applying, and allowing the patch to set.
Inspect for fabric failure, clean with a damp cloth, and dry thoroughly before storage.
Keep blower unplugged; do not immerse in water; clean with a damp cloth.
Dispose of equipment responsibly and return blower to a capable collection center.
Caution regarding high volume air, keeping away from dirt/leaves, water, and traffic.
Connect blower to GFCI outlet, use reset button, and turn switch to ON.
Clean with damp cloth, store indoors in a dry place, coil cord loosely.
Warning against using extension cords with this product due to electrocution hazard.
Must use only on GFCI protected receptacles for safe operation.
Instructions for all grounded, cord-connected products to prevent electric shock.
Product inflation/deflation and setup require competent adult supervision.
Never place on hard surfaces; be aware of fall hazards.
For domestic use only; keep away from fire and ignition sources.
Set up on level ground, firm grass/soil; ensure proper staking.
Maintain 6.6 ft clearance; keep area clean and free of objects.
Not for water use; maximum fall height is 27 inches.
Remove sharp objects, shoes, glasses; no loose clothing; no rough play.
Do not use in wind/rain; keep blower running; check anchors.
Total weight limit 250 lbs; max 3 children; avoid unevenly matched users.
Turn off and unplug the blower from the outlet before deflation.
Untie the intake tube and allow the bouncer to fully deflate.
Maintain a 6.6 ft (2m) obstacle-free zone around the product.
Product dimensions: 9.0W x 12.0D x 7.2H feet.
Unfold the bouncer and position it for inflation.
Attach fabric tube, switch blower ON, and check GFCI adapter.
Blower should remain on; airflow through seams is normal.
Secure the blower to the ground using the provided stakes.
Re-measure clearance zone prior to inflation.