Littlite MIDAS Series User Manual

Gooseneck Lamps & Accessories
Littlite LLC PO Box 430/10087 Industrial Drive Hamburg MI 48139-0430 USA
Phone 810-852-4242 Fax 810-231-1631
December 2014
MIDAS

 XLR CONFIGURATIONS
Recent MIDAS audio consoles have used several different XLR task light connector
orientations requiring minor modifications to Littlite task lights in order to position
the gooseneck light optimally.
MIDAS PRO1.
The PRO1 4-Pin panel socket is rotated 90° to the right and is located just under the
top panel overhang. The overhang prevents our right-angle XLR lights from snapping
into the panel socket. A standard Littlite XR-4 series can be used (we recommend the
18XR-4-LED). The gooseneck can then be positioned over the work surface.

Littlite MIDAS Series Specifications

General

Brand	Littlite
Model	MIDAS Series
Category	Recording Equipment
Language	English

Summary

MIDAS Console XLR Task Light Configurations

MIDAS PRO1 Connector Details

Explains the PRO1's rotated 4-Pin XLR socket and its impact on Littlite task lights.

MIDAS PRO2 Connector Solutions

Lists specific Littlite models pre-modified for the MIDAS PRO2 console's XLR ports.

MIDAS PRO2C Task Light Compatibility

Addresses the PRO2C's 4-PIN XLR connector and the required Littlite modifications.

MIDAS M32 Rear Panel XLR Port

Details the M-32's 180-degree rotated task light connector and necessary adjustments.

Modifying Littlite LLX XLR Connector Pin Orientation

Standard Littlite XLR Pin Setup

Shows the default pin configuration of Littlite XR-4 series XLR connectors.

Removing LLX XLR Pin Insert

Step-by-step guide to removing the pin insert from the LLX XLR connector.

Rotating and Reinstalling LLX Pin Insert

Instructions for rotating the pin insert 180 degrees and securing it.