LIVARNO LUX 55154 User Manual

20 GB/IE
8. P ress the Select button
5
to confirm the setti ng.
A beep will sound and the first field in the date
display will flash.
9. U
se the / button
6
to set the current mo nth.
10. Press the Select button
5
to confirm the entry.
A beep will sound and the second field in the
date display will flash.
11. Use the
/ button
6
to set the current date.
12. Press the Select button
5
to confirm the entry.
The date and time have been set.
The
symbol in the function display will stop
flashing and stay on.
Note: You can change the unit of temperature
(° C or ° F) at any time by pressing the
but-
ton
6
.
You can switch between the 12-hour and
24-hour mode at any time by pressing the
button
6
.
Operation
Use the flexible lamp head
2
to adjust the
LED lamp.
Switching the lamp on or off
The lamp has three brightness settings:
1. Touch the touch switch
8
once to switch
on the LED lamp
1
.
2. Touch the touch switch
8
a second time
to increase the brightness.
3. Touch the touch switch
8
a third time to
increase the brightness more.
4. Touch the touch switch
8
a fourth time to
switch the LED lamp
1
off.
Switching the alarm on and off
Activate the alarm (see “Activating the alarm“).
The alarm will sound at the set time.
Touch any button (
4
,
5
,
6
) on the bottom
of the lamp to switch off the alarm sound.
With the snooze function activated, the
symbol will appear in the function display. The
alarm will sound again after the set snooze
time (max. 2 x).
Activating the alarm
Press the Mode button
4
to switch from time
mode to alarm mode. A beep will sound and the
symbol will appear in the function display
14
.
The time
15
and date display
16
show the cur-
rent alarm time or current date, respectively.
If applicable, press the / button
6
several
times to activate or disable the respective function:
• symbol appears in the function display:
The alarm function is activated.
• symbol
also appears in the function display:
The snooze function is activated.
Press the Mode button
4
to revert from alarm
mode to time mode. A beep will sound. The
symbol will go out and in addition to the
/
symbols for the respective selected functions, the
will appear in the function display.
If no changes are made for 60 seconds, the LC
display
9
will automatically revert from alarm
mode to time mode.
Setting the alarm time, snooze
time and alarm sound
1. If applicable, press the Mode button
4
to
switch from time mode to alarm mode. A beep
will sound and the
symbol will appear in the
function display
14
. The time display
15
will
show the current alarm time.
2. Press the Select button
5
:
A beep will sound, the top line in the time dis-
play will flash, and the
symbol will flash in
the function display.
3. Use the
/ button
6
to set the hour.
4.
Press the Select button
5
to confirm the setting.
A beep will sound, the bottom line in the time
display will flash, and the
symbol will flash
in the function display.
5. Use the
/ button
6
to set the minute.
6.
Press the Select button
5
to confirm the setting.
322287_livx_LED-Tischleuchte_Content_OS.indd 20 09.07.19 09:37

LIVARNO LUX 55154 Specifications

General

Brand	LIVARNO LUX
Model	55154
Category	Home Lighting
Language	English