LivePure LP485HUM - Humidifier Assistance; Troubleshooting Common Issues

Humidier Assistance
Troubleshooting
9
Problem: Excessive Noise
Solution:
1. Check the water tank to make sure it is properly seated on the base.
2. Check the water tank to make sure there are no bubbles when the water tank
is full and running. If there are bubbles, turn the unit o until the bubbling stops.
When the bubbling has stopped, set the unit to the desired speed.
Problem: Humidier not working
Solution:
1. Make sure the power button is not set to “O”
Problem: Mineral buildup on the water tank or tray
Solution:
1. Refer to the section Maintenance.
Problem: Humidity output and water usage decreased
Solution:
1. Check the Power Button to make sure it is set to the desired humidity level and
speed.
2. Check the water tank to make sure there are no bubbles when the water tank
is full and running. If there are bubbles, turn the unit o until the bubbling stops.
When the bubbling has stopped, set the unit to the desired speed.
3. Clean any components that have mineral build-up. Refer to the section
Maintenance.