LivePure LP485HUM - Operating Your Humidifier; Initial Setup and Operation

Operating Your Humidier
Initial Setup
4
Initial Setup:
1. Remove the plastic bag covering from the humidier.
2. Unravel and straighten the cord before use.
3. Lift tank cover o of humidier. Figure 1
4. Fill the unit with clean, cool tap water. Do not ll past max ll line.
5. Place the tank cover back on the tank and secure it in place.
6. Plug the humidier into a wall outlet and start the unit.
Note: DO NOT pour any water into mist output tube.
Figure 1