Why does my Living & Co Vacuum Cleaner have no suction?
If your Living & Co Vacuum Cleaner has loss of suction, first, empty the dust cup and wash the filter if the dust cup is full. Second, remove the nozzle to check for any blockages in the ducts and hose if the filter is blocked. Ensure the dust cup has been correctly fitted and turn the switch to high speed, if needed, and if the switch is in low speed.
Essential safety rules for appliance operation, including usage conditions and handling precautions.
Details critical warnings, prohibited actions, and potential hazards to avoid during use.
Step-by-step guide for unpacking and assembling the vacuum cleaner components.
Instructions for connecting the handle component to the main vacuum unit.
Guidance on assembling the charger and properly storing the vacuum unit.
How to start, stop, and adjust suction power using the primary vacuum cleaner unit.
Instructions for detaching and operating the handheld vacuum with accessories.
Procedures for cleaning, emptying, and maintaining the vacuum cleaner's filters.
Steps for safely removing and disposing of batteries at the product's end of life.
Solutions for common problems when the vacuum cleaner fails to start or run.
Diagnosing and resolving issues related to reduced or absent suction power.
General| Model | LCVC80GB |
|---|---|
| Category | Vacuum Cleaner |
| Power | 800W |
| Dust Capacity | 2L |
| Cord Length | 5m |
| Weight | 4.5 kg |
| Noise Level | 75 dB |
| Type | Bagless |
To Next Page
