What to do if my Livoo Vacuum Cleaner stops working?
If your Livoo Vacuum Cleaner stops working, first ensure the power plug is firmly inserted into the socket. If it is, check if the power socket has electricity, and inspect the circuit breaker. Also, make sure the vacuum switch is turned on.
Why is the UV light not working on my Livoo Vacuum Cleaner?
If the UV light on your Livoo Vacuum Cleaner isn't working, make sure the bottom of the machine is under pressure from the roller by applying slight force. Check that the pressure switch is activated by pressing and holding the depressor switch. Also, ensure no dirt is blocking the lamp by turning off the machine and wiping it clean. If the UV lamp is off or damaged, contact the after-sale department to pick up the line or change the UV lamp.
Why does my Livoo Vacuum Cleaner have smaller suction?
If your Livoo Vacuum Cleaner's suction power has decreased, the receiving tube or hose might be blocked; clean up any blockages. Also, the dust bucket might be full; clean it out. Lastly, the HEPA filtration layer could be filled with dust; clean the filter and HEPA filter.
What to do if the vibrator pad is not working on my Livoo DOH125?
If the vibrator pad on your Livoo Vacuum Cleaner isn't working, ensure the bottom of the machine is under pressure by slightly forcing the roller. Also, verify the pressure switch is on by pressing and holding the depressor switch. If the vibrator is damaged, contact the after-sale department to replace it.
General| Dust container type | Bagless |
|---|---|
| Power source | Battery |
| Noise level | 75 dB |
| Type | Handheld |
| Battery technology | Lithium |
| Cord length | Not applicable |
| Filters | HEPA |
To Next Page
