Need help?Do you have a question about the Livox AVIA and is the answer not in the manual?
General| Type | LiDAR |
|---|---|
| Model | AVIA |
| Range | 450 m |
| Range @ 80% reflectivity | 450 m |
| Field of View (Horizontal) | 70.4° |
| Data Rate | 100 Mbps |
| Weight | 1.2 kg |
| Operating Temperature | -20°C to 60°C |
| Storage Temperature | -40°C to 85°C |
| IP Rating | IP67 |
| Laser Safety | Class 1 |
| Shock Resistance | 50 g |
| Wavelength | 905 nm |
| Communication Interface | Ethernet |
| Point Cloud Density | 240, 000 points/s |
| Accuracy | ±2 cm |
Highlights detection range, light weight, triple return, and scanning patterns.
Enables real-time point cloud data viewing and custom app development.
Details horizontal (70.4°) and vertical (77.2°) field of view.
Mounting dimensions and hole locations for the Livox Avia.
Dimensions for mounting the Livox Converter 2.0.
Details M12 aviation connector and conversion cable.
Instructions for connecting power and sync cables.
Steps and IP modes for connecting the Livox Avia to a computer.
Instructions for downloading and using Livox Viewer software.
Behavior and power considerations in low-temperature environments.
Lists model (AVIA), wavelength (905nm), and laser safety (Class 1).
Details detection range at different reflectivity and illuminance levels.
Covers FOV, random errors, beam divergence, point rate, and data latency.
Outlines power consumption and voltage supply requirements.
Device compliance with FCC Rules.
Declaration of conformity by the supplier.
Device compliance with ISED regulations.
Device compliance with EU Directive 2014/30/EU.
Warning regarding controls and procedures leading to radiation exposure.
Information on Class 1 Laser Product classification and safety.
Table detailing hazardous substances in components per SJ/T 11364.
To Next Page
