LML Speedy 4-Stroke - Fuel, Transmission, and Controls; Brakes, Tyres, and Suspension

Technical Specifications
Technical Specifications
Fuel Petrol 87 Octane and above
Fuel tank capacity 5.5 Litres (inclusive of 1 litre in reserve)
Fuel cock Three way tap :
Open (ON), Close (OFF), Reserve (RES)
Carburettor KEIHIN PB18–side draft
Spark Plug RG4HC - Champion
C8EH9 - NGK
UHR3CC - BOSCH
Spark plug gap 0.7~0.8 mm
Starting Kick Start Push Button for Auto start
Clutch Multiplate, oil bath.
Transmission 4 Speed constant mesh
Overall Gear Ratio
1st Gear 17.07
2nd Gear 10.71
3rd Gear 7:89
4th Gear 5.83
18
Chassis Pressed steel sheet, and rear tubular framed
structure covered by sheet metal shell assy.
Steering column and suspension The steering column is pivoted at the front
wheel swinging hub
Front and rear suspension Front and rear suspension with hydraulic dampers
and helical spring
Brakes
Front brake Drum brake, mechanical expanding shoe type.
Rear brake Drum brake, mechanical expanding shoe type
Tyres
Front and rear tyres 89 x 254mm (3.50 x10), 4 ply rating, interchangeable
Tyre pressure
Front wheel 1.2 kg/cm
2
(17 psi)
Rear wheel 1.8 kg/cm
2
(25 psi)
2.5 kg/cm
2
(35 psi) with pillion rider
Controls
Steering Handle bar
Accelerator Twist grip type on right hand side of the handle bar
Gears By hand on left hand side of the handle bar
Clutch Lever operated on left hand side of the handle bar
Front brake Lever operated by right hand
Rear brake Pedal operated by right foot
17