To Next PageTo Next Page
Need help?Do you have a question about the LNS HYDROBAR SPRINT 555 and is the answer not in the manual?
Manual structure, page numbering, and layout information.
Copyright, reproduction, and liability disclaimers for the manual.
Manufacturer's declaration regarding safety directives and standards.
Essential safety rules for operating and maintaining the equipment.
Description and illustration of the machine's safety features.
Key technical specifications like weight, dimensions, power, and performance.
Information on required space and placement dimensions for the machine.
Identification and description of the machine's main components.
Guidance for safe handling, uncrating, and lifting the equipment.
Steps for aligning and securing the bar feed system.
Procedure for stabilizing the machine by anchoring it.
Instructions for electrical and pneumatic system connections.
Overview of electrical components and compliance with international codes.
Layout and detailed description of control cabinet elements.
Explanation of electrical symbols and schematic diagrams.
Details on interface cables, diagrams, and connection procedures.
Description of pneumatic movements and required air pressure.
Details on the air filtering unit's function, layout, and settings.
Description and layout of the pneumatic valve control elements.
Presentation of pneumatic system schematics.
Description and layout of the system's hydraulic components.
Explanation of hydraulic symbols and system schematic.
Description of the magazine for holding and feeding bar stock.
Details on the guiding elements that support the bar.
Description and layout of the mechanism that pushes the bar.
Description and layout of the belt drive for motor engagement.
Description and layout of the component that clamps the bar.
Description and layout of the standard bar support.
Description and layout of the optional automatic front rest.
Description and operation of the optional system for moving the feeder.
Overview of the remote control unit, its display, and keys.
Procedure for starting the bar feed system.
Description of the automatic operation sequence and required checks.
Step-by-step description of the automatic machine cycle.
Explanation of parameters for configuring the bar feed system.
Information on error messages and diagnostic procedures.
Analysis of factors impacting machine operation and troubleshooting.
Guidelines for routine maintenance of machine components.
Template for ordering spare parts or accessories.
Contact information for LNS service centers worldwide.
An illustration of programming for lathe and bar feeder interaction.
Chart for converting measurements between millimeters and inches.
Table to calculate bar diameter for shaped materials.
General
